Applicable Scenes:
They are suitable for occasions such as city special charging stations that provide charging for bus, taxi, public service vehicles, sanitation vehicles,logistics vehicles, etc.; city public charging stations that provide charging for private cars, commuter, bus; intercity highway charging stations and other occasions that need special DC fast charging.
Features:
Simple operation, convenient installation; High efficiency, reliable and stable performance;
Friendly interaction interface,7inch color touch screen;
Support multiple modes of charging, operation management and payment; Support 3G/4G,, Ethernet or wireless telecommunication;
Support RFID Card/OCPP 1.6 (optional);
Support CCS-2/CHAdeMO connector(or Socket)optional; Overload integrated Protection;
Technical Data
Sr. NO. | Parameters | Requirements | |
General Requirements | |||
1 | EV charger Type | DC | |
2 | Charger Capacity | 50KW | 80KW |
3 | Model No. | ENC-DCL050A(B) | ENC-DCL080A(B) |
4 | Mounting | Ground mounted | |
Input Requirements | |||
5 | AC Supply System | Three-Phase, 5 Wire AC system | |
6 | Nominal Input voltage | 380V ± 15% | |
7 | Input frequency | 50Hz, ±1.5Hz / 60Hz, ±1.5Hz | |
Environmental Requirements | |||
8 | Ambient Temperature | -25 to 55°C | |
9 | Ambient Humidity | 5 to 95% | |
10 | Storage temperature | -40 to 70°C | |
Mechanical Requirements | |||
11 | IP Ratings | IP 54 | |
12 | Cooling | Forced air cooled | |
Output Requirements | |||
Number of outputs | 1 OR 2 | ||
13 | Type of each output | 200-750VDC (+20% and -20%) | |
14 | Output Current | Max. 150Amp | Max. 200Amp |
15 | Power Factor | =0.99(50% load above) | |
User Interface & Display Requirements | |||
16 | Display & touch-screen size | 7 inches | |
17 | User Authentication | Mobile application or User interface / QR Code/RFID Card /Password Login | |
18 | Metering Information | Consumption Units | |
Communication Requirements | |||
19 | Communication between EVSE and Central Server | OCPP 1.6 protocol (optional) | |
20 | Charger and CMS | Ethernet and GPRS Modem | |
Protection & Safety Requirements | |||
21 | Safety Parameters | Over current, under voltage, Residual current, Surge protection, leakage protection, Short circuit, Over temperature, etc. | |
22 | Power failure | If there is a power failure, user is indicated about this. | |
